Archive for the ‘Uncategorized’ Category

Got some work done!

Posted: March 1, 2017 in Uncategorized

Got some work done!

So I have moved this thing a gazillion times. I took it out to the shed, I brought it back inside, etc. It’s gonna stay here once it’s up and running fully.


It took me a while to re-wire it, but here’s a craptastic shot of what it looks like now.

So the drivers have a “custom” socket to make it easier to hook up to Probotix’s breakout board. I want to eventually use Ramps as my cnc controller, but continue to use my probostep vx drivers. I needed a way to interface my drivers with pololu sockets. If there’s interest I can tell you how I did it, but for now just pictures.



So that’s where I am at right now. 🙂

Thoughts? Feelings? Hate? Love? Leave some comments.


And wow oh wow. Big updates coming.

A little over 2 years ago, I lost 190 lbs and man, was i ever glad to see her go lmfao. Needless to say, 3 years have past and I will be regularly blogging starting soon.

I’m with an amazing lady now, life is good.



So, It’s been over a year since i’ve posted. I let my domain expire, but I think i’ll be renewing that soon. I finally have a WORKING cnc machine. A while back I put it together, got it moving and all, then I had crashed it a little hard and the table nut on the y axis came all the way out (they are press fit exactly for reasons like this) and I was so frustrated with it at the time I just quit. No messing with it, no tinkering, nothing. Just work, eat and sleep.

All that changed last week. We are in the process of building a house as well, and It’d been 3 weeks since the weather would cooperate with us enough to work on it. We got half of our floor joists installed, and I wasn’t ready to stop working. I decided i’d finally tackle my CNC problem once and for all, it was man vs machine and I finally talked it into cooperating with me. I removed the Y-axis motor/slide and reinstalled the delrin nut with some strips of paper as recommended by John at (he made the machine i purchased) and proceeded to debug and try to get it working.

After some messing around I was able to make it cut text… but it was cutting it 2x bigger than I was drawing in Cut2d. It also was cutting it inverted and backwards. Well, I figured out through lots of interwebs browsing that I could reverse my x axis in the CNC software and after figuring out how my table orientation was, I discovered that It just cuts upside down. No biggie as long as the end product is right.  So now I can cut text and other objects and they come out 100 percent correct now.  Still would like to get some limit switches for safety lol.


Well, enjoy some pictures 🙂


705698_10151327943520255_856062629_o 886413_10151545714625255_1143506306_o 1149083_10151766952305255_1501527833_o 1077712_10151766951755255_181112405_o


Posted: February 27, 2012 in Uncategorized

So as you may have noticed, I am now on my own website. I went ahead and found a place to get some webhosting, and bought my domain. This gives me more freedom to do what would like with my place. I’d love to eventually have a web store too where you can order custom key-chains, nameplates, plaques, logos, ETC.

But at any rate, welcome to The Build Room


Some Progress!

Posted: September 26, 2011 in Uncategorized
Tags: , , , , ,

So, as you guys know i’ve started building my Mantis 9 Clone. I had the wood cut out from a friend over at named Harry. He’s a great guy, Everything he does oozes awesome sauce over there, and he makes custom cast parts to build a Joes CNC. I think i’ll go that route once I move home and have a shop built, from there its on to custom plaques, cabinets, and who knows what else, maybe i’ll be able to make something as awesome as Harry!

I had a bluumax gantry router, availible at but i never fully utilized it to its potential. I think I cut maybe…. 1/2 a part out, I say 1/2 because I did not secure the Z axis flexible coupling well enough, and half way through my job, the z-axis fell and my dremel went through the table, burning the HDPE cutting board, my dremel collet, and drilling a big hold through my table as well. Luckily my electronics were not harmed in the process. (They got WARM though) I hate to sound like an advertisement for my friends, but if you want to get into CNC at a realative low cost and great support, Give Shawn at a try.

So now some pics!

Stay tuned!


Posted: September 19, 2011 in Uncategorized

So, I’m getting seriously discouraged. I’ve been putting my machine together, but without any real dedication. Due to me over thinking, I had the wood cut out of 3/4″ plywood instead of 1/2″ So, everything was off by JUST enough, that things did not fit well, and quite frankly, I am ready to just throw the whole thing out. I shouldn’t be like that, but its seriously discouraging.

Just a small update, I placed my McMaster order last week, to get the final things I’d need for my machine. My box full of my old machine came, it had everything except the MDF board. I didn’t need all the perspex pieces, but im not going to complain 🙂

My McMaster order Totaled 101.27, not too bad. it was 6.61 for UPS ground shipping.

I also found a LCD screen at goodwill for 15 dollars. Took it home, plugged it in, FLAWLESS! It is a little dim, but I can work with that, it’s going on my CNC machine anyways.

Thanks for reading all!